- A YouTuber made a giant ‘superdome’ fan that consists of 15 separate 120mm case fans
- This 3D-printed project turned out far better than a jokey prototype he previously made
- In fact, the superdome solution dropped the CPU temperature by 20C, and wasn’t noisy when doing that
If you’re a PC enthusiast, and a fan of fans, as it were, here’s a project guaranteed to pique your curiosity – a giant ‘superdome’ fan, comprising of a whole bunch of standard 120mm cooling fans, that attaches to the computer as a side panel.
As spotted on Reddit, YouTuber Major Hardware came up with this idea, which was inspired by commenters on a previous project showcased on his channel.
The idea with that older video was to build ‘The Destroyer of CPUs‘, a tongue-in-cheek version of a 120mm Noctua case fan. It was a bizarre version of a Noctua NF-A12x25 fan made up of 15 tiny little (30mm) fans, arrayed in a dome design.
Article continues below
Done more for fun than anything, it was impressive that the custom 15-tiny-fan take on a standard case fan performed just the same as the full Noctua 120mm version in terms of the cooling delivered. Actually, it was a smidge better based on Major Hardware’s testing, albeit the custom effort was a lot noisier which was the notable wrinkle.
Commenters then suggested building a huge dome made up of actual Noctua NF-A12x25 fans, so that’s exactly what Major Hardware did.
Noctua sent the YouTuber 15 of these 120mm fans, and Major Hardware scaled up the previous concept, 3D printing the necessary supporting structure, to produce a big superdome of a fan that essentially slotted on to his Lian Li PC case as a side panel. You can check out the result below.
Dome and dusted
The YouTuber found that the new giant dome design was far more practical than the previous miniature effort which was simply made for a meme.
Testing how hot the gaming PC got in a Battlefield 6 session showed that beforehand, the CPU temperature reached 86C (the YouTuber fully admits that the cooling setup isn’t optimal here, preferring RGB aesthetics over thermals to an extent – remember, the PC has to look the part on YouTube). However, with the superdome fan in place, the temperature of the Ryzen processor dropped to around 66C when playing the shooter – a big difference of 20C overall.
Also, unlike the tiny prototype version, this supersized fan didn’t make a racket, with Major Hardware observing that it “doesn’t make that much noise”.
So, were there any drawbacks? Well, the superdome does use a fair bit of power, although at just under 30W, it’s not a wattage guzzler. There’s also the issue of a lack of dust filters in this implementation, although the YouTuber observes that he’s not too worried about that due to the way his case is set up to exhaust the hot air anyway.
Indeed, Major Hardware was very impressed with the giant fan, noting that “it’s kind of nuts” how much air the superdome is pushing around, and concluding that: “I might just leave it on my PC as is.”
You can make your own version if you wish, as the 3D printer designs (for the Lian Li case) are available (and provided in the details on YouTube), although the other drawback, mind, is the cost of buying the necessary 15 fans. They are $35 apiece in the US at the time of writing, so you’re looking at $525 plus the cost of the other materials for printing and assembly.
Still, you’ll end up with quite a ‘statement PC’ and one that’s pretty effectively cooled by all accounts. Just watch that dust accumulation if you go for a giant fan-dome panel for your gaming rig.
If you like this kind of stuff, check out a few other off-the-wall computer cases we’ve seen so far in 2026, which includes a coin-op gaming PC.
The best laptops for all budgets
Follow TechRadar on Google News and add us as a preferred source to get our expert news, reviews, and opinion in your feeds. Make sure to click the Follow button!
And of course, you can also follow TechRadar on YouTube and TikTok for news, reviews, unboxings in video form, and get regular updates from us on WhatsApp too.
